Explore the Waters with Poole Bay Small Boat Angling Club

Cygnus cygnet rebui...
 
Notifications
Clear all

Cygnus cygnet rebuild

29 Posts
10 Author records
0 Reactions
8,230 Views

Historical contributors are shown by their recorded names. This total counts recorded accounts, not individual people or current memberships.

Historical contributor
 

Sounds like you're doing a really thorough job Ron....

Anyone would think you're keen to get afloat..

Hoping for maiden voyage next week stuie

 

As we were waiting for the starter to be rebuilt I took my son down for a spot of fishing off the mooring on Monday night, started off well when I had one really good bite but lost it on the way in, my son did better with his first ever bass which a small one of around a 11/2 lb which went back and a larger one which got off the hook level with the boat.

 

Plenty of further bites but no fish, we lost count of the small crabs we had but a good night with a bit of father son bonding.

 

The starter is now back and rebuilt and looks brand new, had an excellent service all,for £95 including parts and the turnaround was very quick. Dropped off Monday at 9.00 and ready for collection by afternoon the following day. So if you need anything like this done the give ACW on Leigh road in Wimborne a go, top guys


Historical reactions: Like 2
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

Ron, I'd suggest you need more chain for your anchor, and 150ft of warp may not be enough if anchoring in 80 or more feet of water.

Many useful threads on the site, this is the most recent one.  http://www.pbsbac.co.uk/ipb/topic/17517-windlass/?hl=anchoring&do=findComment&comment=137249


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

I would agree with Stuie re the anchor warp and chain length.  You will not be able to anchor in anything much deeper than 50' with what you have.

 

I suggest min 30' chain attached to 150 metres min for fishing in our area.  12mm warp will be fine as will 8mm chain.  Regards anch a 10 kilo Bruce type or a 6 kilo Delta type anchor would be my choice.


Historical reactions: Like 2
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

Ron

Boat's obviously coming along nicely.

I don't know where your mooring is, but if it's inside the Bass nursery area of Poole Harbour any Bass caught between 30th April and 1st November have to go back. In fact you're not permitted to target them during that period. Outside of that period the 3 bass bag limit per person applies.


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 Rob
 

And over 42cm Brian!!!


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

Ron

Boat's obviously coming along nicely.

I don't know where your mooring is, but if it's inside the Bass nursery area of Poole Harbour any Bass caught between 30th April and 1st November have to go back. In fact you're not permitted to target them during that period. Outside of that period the 3 bass bag limit per person applies.

Hi Brian

 

Wasn't targeting bass as such and it did go back. To be honest apart from a few mackerel everything I've caught this year has gone back. I'm not a big fish eater but enjoy the sport and location more.

 

My mooring is at NHYC so technically outside but not something I plan on doing when the boat is up and running. Was really trying for a few flatties. But thank you for pointing this out.


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

No problem Ron. Just didn't want you to get into trouble.



   
ReplyQuote
Historical contributor
 

I believe you can fish for Bass anywhere in the designated Bass Nursey Area (Poole) between the dates mentioned as long as Sandeel is not used as bait?

 

SIFCA confirm

 

Bass Nursery Area

Under The Bass (Specified Areas) (Prohibition of Fishing) (Variation) Order 1999.

Fishing for bass, or fishing for any fish using sand-eels as bait, by any fishing boat within any part of the harbour, as defined, is prohibited between 30 April and 1 November.

 

 

I am unaware of any update.



   
ReplyQuote
Historical contributor
 

You can't fish for bass from a boat in the nursery area between 30th April and 1st Nov, regardless of the bait/method used and any bass caught must be returned

You can't use sandeels for any type of fish in the nursery area between those dates.



   
ReplyQuote
Historical contributor
 

Bit of an update on the rebuild.

 

I now have a fully functioning boat, trim tabs now working lights,radar,radio,bilge pumps and engine all work, all of the time and when requested !

 

Had a bit of a problem locating the stern drive pump motor which needed replacing but did finally find one that looked like it would work but on arrival the machined face wasn't quite the right shape so the input shaft wouldn't go fully into the pump itself. After abit of head scratching and swapping a few parts between the old pump and new I had a motor that did finally fit and that works.

 

Replaced all of the fuse boxes and 90 % of the toggle switches that were playing up. This has sorted a lot of the intermittent electric problems with the boat, it's really frustrating when something works one day and not another. Most of these were sourced from either Maplins or eBay and seem to be reasonable quality.

 

Longest wait that I had was for a engine stop solenoid which came via China and was delivered about three weeks from order date. This is also now fitted and functioning very well.

 

Jobs left to do include fitting an air horn, small amount of fibreglassing and fitting a deck filler for the fuel tank. Also still waiting for the sun / rain canopy to be made and for delivery of a replacement Humminbird fish finder head unit. Canopy is being made locally using the old one as a template with a few modifications to improve it slightly and the fishfinder was the only item missing from the instruments when we got the boat. The new fishfinder head unit is coming from Florida and is an ex display Unit sourced via eBay USA for the bargain price of £40 posted.

 

I was Hoping for a maiden voyage in the next couple of weeks. Unfortunately this time of year is full on and I normally have to work at least Saturday's leaving Sunday as my only family day so will have to see if I can grab a few hours sometime soon. However I'm getting quite excited seeing all these cod pictures and may try and make the cod contest on Sunday week.

 

If anyone has a decent mark for a few cod I would appreciate the help as not actually caught a cod before lol.

 

Regards Ron


Historical reactions: Like 3
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

We bit the Bullet and took the boat out of the water a couple of weeks ago after realising we had trouble with the tilt on the stern drive that could only be fixed on dry land

 

My father in law did a full week painting and cleaning and organising for the repairs to be done, my dad was on polishing duties and myself and brother in law cracked out the few remaining jobs on the list

 

One week later and the old girl was back in the water and on the mooring. Hopefully we can now get on with the important job of actually doing some fishing.

 

Should have a full crew tomorrow morning as the weather looks promising. I'm Glad that the refit is now complete as it took a lot more work than we had initially thought but hoping for a nice windless summer

 

See you out there


Historical reactions: Like 7
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

Quote "  it took a lot more work than we had initially thought "

 

 

It always does Ron.

Let's hope all goes well.  <img src="/emoticons/default_smile.png" alt=":)" data-emoticon="" srcset="/emoticons/smile@2x.png 2x" width="20" height="20" />

 

Jim


Historical reactions: Like 2
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 Rob
 

Indeed Jim, wise words!


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Historical contributor
 

I know how that feels.

Safe trip out and I hope all your hard work brings you tight lines.


Historical reactions: Like 1
Preserved legacy totals; shown separately from new reactions. Recorded accounts are not verified people.

   
ReplyQuote
Page 2 / 2
Share: